Hobart #22 Meat Grinder / Chopper 120V - 1 1/2 hp

Description

Hobart #22 Meat Grinder / Chopper 120V - 1 1/2 hp
MEAT CHOPPER Hobart 4822-34 STANDARD FEATURES ■ 1 1⁄2 H.P. motor (1 1⁄4 H.P. for 230/50/1) ■ 12-20 lbs. per minute capacity ■ Ideal for “On Demand” meat chopping for processing fresh, boned meat ■ Can be fed at a rapid pace with continuous chopping action and no crushing or mashing of the meat ■ All parts which contact food are easily accessible and readily removable for convenient cleaning without the use of tools OPTIONS ❑ Funnel shaped cylinder ACCESSORIES ❑ #22 Stay-Sharp knife & plates ❑ #22 stuffing tubes SPECIFICATIONS MOTOR: 11⁄2 H.P. (11⁄4 H.P. for 230/50/1), four pole, AC induction motor. Single phase is capacitor start-capacitor run type. Three phase is poly-phase, induction type. Motor ventilation is provided through screened openings in the base assuring cool operation. Available in standard electrical specifications shown below. SWITCH: Conveniently mounted at back of machine (can be changed to front). CORD AND PLUG: A 6 foot, flexible 3 wire cord is furnished with the following plugs: 120/60/1 – NEMA 5-15P; 208-240/60/3 – NEMA L15-20P; 230/50/1 – No Plug; 240/60/1, NEMA 6-15P. TRANSMISSION: Precision made gears and shafts mounted on ball bearings are fully enclosed in the transmission case, packed with a special oil at the factory. Smooth, quiet operation is assured for years of normal operation. The attachment hub has a double seal, designed to exclude meat juices or water from the transmission. Worm speed is 212 r.p.m. for 60 Hz, 180 rpm for 50 Hz. CHOPPING END: 4822 has a Hobart protective type chopping end, with cylinder of the spiral-fluted design. FS option has a guarded open bowl type chopping end. A heavy cast aluminum safety guard is supported by vertical posts permanently mounted on the cylinder. The cylinder, worm and adjusting ring are all heavily tinned. A heat-treated steel knife and plate and plastic feed stomper are provided. STAY-SHARP KNIFE & PLATES: The Hobart Stay-Sharp knife & plates are made from an alloy steel that holds its edge longer than standard carbon steel. Stay-Sharp plates also can be resharpened many more times than regular plates. These two features allow a substantial lifetime cost benefit with the Hobart StaySharp plates. FEED PAN: 4822 has a stainless steel feed pan — 191⁄2" x 111⁄2" x 21⁄2" inside dimensions. FS option has stainless steel pan — 33" x 153⁄4" x 33⁄4" inside dimensions. CAPACITY: 4822 will grind 16 lbs. per minute, first cutting through a 1⁄8" plate. FS option will grind 20 to 22 lbs. per minute, first cutting through a 1⁄8" plate. FINISH: Standard finish is stainless steel housing. An attractive stainless steel trim plate is provided at the attachment opening and stainless steel legs, cushioned on the bottom with resilient neoprene rubber, provide clearance to keep the table clean under the chopping unit. STANDARD EQUIPMENT: Includes the working unit with protective type tinned chopping end, stainless steel feed pan, plastic feed stomper, one knife and one plate. The plate has 1⁄8" diameter holes.
Hobart #22 Meat Grinder / Chopper 120V - 1 1/2 hp
MEAT CHOPPER Hobart 4822-34
STANDARD FEATURES
■ 1 1⁄2 H.P. motor (1 1⁄4 H.P. for 230/50/1)
■ 12-20 lbs. per minute capacity
■ Ideal for “On Demand” meat chopping for processing fresh, boned meat
■ Can be fed at a rapid pace with continuous chopping action and no crushing or mashing of the meat
■ All parts which contact food are  easily accessible and readily removable for  convenient cleaning without the use of tools
OPTIONS
❑ Funnel shaped cylinder
ACCESSORIES
❑ #22 Stay-Sharp knife & plates
❑ #22 stuffing tubes
SPECIFICATIONS
MOTOR
: 11⁄2 H.P. (11⁄4 H.P. for 230/50/1), four pole, AC induction motor. Single phase is capacitor start-capacitor run type. Three phase is poly-phase, induction type. Motor ventilation is provided through screened openings in the base assuring cool operation. Available in  standard electrical specifications shown below.
SWITCH
: Conveniently mounted at back of machine (can be changed to front). CORD AND PLUG: A 6 foot, flexible 3 wire cord is furnished with the following plugs: 120/60/1 – NEMA 5-15P; 208-240/60/3 – NEMA L15-20P; 230/50/1 – No Plug; 240/60/1, NEMA 6-15P.
TRANSMISSION
: Precision made gears and shafts mounted on ball bearings are fully enclosed in the transmission case, packed with a special oil at the factory. Smooth, quiet operation is  assured for years of normal operation. The attachment hub has a double seal, designed to exclude meat juices or water from the transmission. Worm speed is 212 r.p.m. for 60 Hz, 180 rpm for 50 Hz.
CHOPPING END
: 4822 has a Hobart protective type chopping end, with cylinder of the spiral-fluted design. FS option has a guarded open bowl type chopping end. A heavy cast aluminum safety guard is supported by vertical posts permanently mounted on the cylinder. The cylinder, worm and adjusting ring are all heavily tinned. A heat-treated steel knife and plate and plastic feed stomper are provided.
STAY-SHARP KNIFE & PLATES
: The Hobart Stay-Sharp knife & plates are made from an alloy steel that holds its edge longer than standard carbon steel. Stay-Sharp plates also can be resharpened many more times than regular plates. These two features allow a substantial lifetime cost benefit with the Hobart StaySharp plates.
FEED PAN
: 4822 has a stainless steel feed pan — 191⁄2" x 111⁄2"  x 21⁄2" inside dimensions. FS option has stainless steel pan —  33" x 153⁄4" x 33⁄4" inside dimensions.
CAPACITY
: 4822 will grind 16 lbs. per minute, first cutting through a 1⁄8" plate. FS option will grind 20 to 22 lbs. per minute, first cutting through a 1⁄8" plate.
FINISH
: Standard finish is stainless steel housing. An attractive stainless steel trim plate is provided at the attachment opening and stainless steel legs, cushioned on the bottom with resilient neoprene rubber, provide clearance to keep the table clean  under the chopping unit.
STANDARD EQUIPMENT
: Includes the working unit with  protective type tinned chopping end, stainless steel feed pan, plastic feed stomper, one knife and one plate. The plate has 1⁄8" diameter holes.
×
×
×
×
×
×
×
×
×
×
×
×
Buy now and save!
Tell a friend
Watch now
Postage info
Click the Postage tab above the listing description for more info
FREE Postage
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Garland G60-6R24RR NAT 6 Burner 60" Range, 24" Raised Griddle, 2 Standard Ovens
Garland G60-4G36RR LP Gas 4 Burner 60" Range with 36" Griddle, 2 Standard Ovens
Peerless C131B Gas Countertop Bake Oven - 30,000 BTU
Amana RCS10TS Commercial Microwave Oven Medium Volume - 120V, 1000W
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Restauranium
Postage
Shipping is FREE for this item
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by