Duraclean Ceiling Tile - White 2x4 - Box of 10 Tiles - Open Box

Description

Our DuraClean tiles are made from UV Stabilized 1/8" (.125") thick vinyl plastic. This durable tile is perfect for industrial and commercial areas like; bottling and food processing plants, food preparation areas, schools, dorms, daycare, and educational facilities. Constructed from 100% PVC Vinyl, our DuraClean tiles are Class A Fire Rated and can be washed over and over without any damage to them. Backed by our 25 Year ProShield Warranty, DuraClean tiles are built for a lifetime of use.
Designed to fit all standard 15/16" - 1" T-Bar Ceiling Systems. Most of the thermoform ceiling tiles come in two sizes, 2'x2' and 2'x4'.
FYI - If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a
2' center T bar available online
or at most local hardware stores...it's easy!
Installation Requirements
DuraClean panels can quickly and easily fit into almost any ceiling grid system. Available in the same size as any typical 2' x 2' ceiling tile, it can be the uncomplicated replacement for the tiles that are seen and found in any typical office locale. There are some grids that use a "stab and connect" system that may cause the corners of the tile to sit higher than the rest of the tile.
Important!
Upon receiving the panels, acclimate them to the room environment for at least 72 hours before installing. Be sure to store the ceiling tiles by stacking them flat and not on their edges. For instance, do not lean the box of tiles vertically against the wall. This can cause the tiles to bend.
When installing DuraClean tiles in ceilings with sprinkler systems, leave at least a 1/4" gap around the edge of the sprinkler bezel to the tile. This allows the tile to fall away from the ceiling during a fire and not foul the sprinkler system.
To cut any DuraClean panel, mark and score the face of the tile with a utility knife and snap it away from the cut. A skill or table saw can also be used in cutting multiple tiles at once and a RotoZip or hole-saw for odd sizes shapes and circular holes - like sprinkler heads or can lights.
Use a mild soap and water solution or most household cleaners to clean the DuraClean ceiling tiles. Just spray the cleaner onto a clean rag and wipe. Power-washing DuraClean panels is also an option, but avoid placing the spray nozzle tip too close to the panel in order to prevent damage to the tile face. The tiles are unaffected by most corrosive chemicals, but you should avoid using acidic cleaners. Do not use abrasive cleansers to scrub.