Andis 04521 T-Outliner Trimme Replacement T-Blade - Carbon Steel

Description

Product description
3D BARBER Advanced Ceramic Blade
FIT MODEL：
Fits Andis Blackouts
Fits Andis GTX
Fits Andis T-outliner
Fits Andis T-outliner Cordless
Benefits:
Advanced ceramic technology makes our ceramic blade 5X sharper
Lasts 5X longer
Stays 5X cooler
LONG LASTING:
Made from a high-tech ceramic material to stay sharper longer.
Heat resistant for a cooler and more comfortable cutting.
Rockwell Hardness rating of 78.
EASY INSTALLATION:
This replaces the small moving cutter blade.
Can also be used to upgrade steel blades to ceramic blades.
SAVES YOU MONEY:
Save your money and buy a high quality and durable ceramic cutter blade NOW!!!
Install and adjust 0 gap for the blade
1.Use screw driver, Remove the screw from the trimmers.
2.Install the Plate and put metal gasket on the top. and don not tighten the screw, Leave a little space for the plate. So the plate can move up and down. Which can enable the moving blade more closely to the guide blade.
3.Make the moving blade towards to the guide blade. Then you need a flat surface, to lay it flat, make a little bit angel for guide blade, like 10 degrees, so the moving blade is a little bit underneath the guide blade. From that angle, tighten the screws. Then you don’t cut yourself, because the moving blade is very sharp.
4.Check if it is ok. Use your finger cross the blade, if it is smooth, the adjustment is OK. If it was rough, which means the moving blade was higher than guide blade, you need make more several time to try it out.
5.Reattach the blade to the trimmer head, and tighten the two screw.
100% QUALITY GUARANTEE
- Buy with Confidence and Add to Cart Now! We Provide 100% Customer Support &12 Month Product Warranty.